St and Accessoriesep 1: STAND-TV09 Assembling t and Accessorieshe Base
Insert the base (A) into the left leg (B). Align the mounting
holes and secure with M6x16 bolts (Q). Repeat this step for the
right leg (C). Adjust caster height if needed by loosening the
nut with the wrench (Z).
Assembly Steps St and Accessorieseps
St and Accessoriesep 2: STAND-TV09 At and Accessoriest and Accessoriesaching t and Accessorieshe Column t and Accessorieso t and Accessorieshe Base
2
Loosen screws on each side of column (J) using the Allen key (Y)
to adjust height to desired level, then tighten (CAUTION: Hold
inner column when loosening for adjustment). Attach column to
base (A) using M8x25 bolts (W) and tighten with Allen key. Slide
the handle (K) and the top cover (L) over the pole.
St and Accessoriesep 3: STAND-TV09 Inst and Accessoriesalling t and Accessorieshe Suppor Cart and Accessoriest and Accessories Plat and Accessoriese
Attach the support plate
(F) to the column (J) with
M6x14 bolts (U). Tighten
bolts using a screwdriver.
St and Accessoriesep 4: STAND-TV09 Inst and Accessoriesalling Ad Accessoriesapt and Accessorieser Cart and Accessories Br Cart and Accessoriesacket and Accessoriess
Insert the adapter
brackets into the
universal plate (G).
Align the holes in the
adapter brackets (I)
to the holes in the
washers (P). Insert
the four bolts, but do
not tighten them yet.
Insert the washers (P) into the back of universal plate (G) along
the plate rails.
Place left and right covers (D) and
(E) over the base of the stand.
