2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
Place Desk Sleeve
(A)
on the desktop at the desired location. Measure the space between the
underside of the desktop and the lower portion of the sleeve to determine the required Spacers
(S-E)
and Washers
(S-D)
for mounting. Drill 10mm deep pilot holes in the desktop for the desk sleeve and
the rear end of the keyboard mount using a 3mm (1/8”) drill bit. Install using M5x35mm Screws
(S-A)
and previously counted Washers
(S-D)
and Spacers
(S-E)
.
S-A
(x4)
M5x35mm
Screw
S-C
(x2)
M6x8mm
Screw
S-D
(x6)
Washer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE:
SOME HARDWARE MAY NOT BE USED
Tape Measure
Drill
Phillips
Screwdriver
A
(x1)
Desk Sleeve
S-E
(x12)
Spacer
S-B
(x3)
M5x8mm
Screw
OPTION A
: Regular Mounting
M5X35
20X6.2
15X5.3X1.2
WARNING
S-E
S-D
S-A
A