26
USING THE BLUETOOTH SPEAKER
You can use Qumi Z1V as a speaker to play music from mobile devices wirelessly via
their mobile devices. To use the projector as a speaker:
1.
Power on the projector. Refer to the
Powering On/Off the Projector
section on
page
15
.
2.
Press the Projector/Bluetooth Mode (
) button on the keypad or the remote
control to enable Bluetooth on the projector.
3.
When activated, the projector lens will turn off and the Status LED will illuminate blue
with behavior based on the following:
Solid Blue - Successfully connected.
Quick Blinking Blue - Waiting for connection. If after 1 minute of quick blinking
there is no connection, then the pairing process needs to be restarted.
Slow Blinking - Connection failed.
