2
General Safety Information
RG1 IEC 62471-5:2015
Do not open the casing. There are no user-maintainable parts inside the machine. For any
maintenance, please contact a qualified service technician.
Follow all warnings and precautions on the machine or in this Manual.
According to its design, the projection light source is extremely bright. To avoid harm to
your eyes, do not look straight at the lens when the LED is ON.
Do not place the machine on unstable surface or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place any heavy objects (e.g., books or bags) on the unit.
Q9 Installation Notice
Allow at least a 500mm (20”) clearance around the exhaust vent.
Make sure that the intake vents do not recycle hot air from the exhaust vent.
When operating Q9 in an enclosed space, make sure that the surrounding air temperature
within the enclosure does not exceed the operating temperature while Q9 is running, and
the air intake and exhaust vents are unobstructed.
All enclosures should pass a certified thermal evaluation to make sure that Q9 does not
recycle exhaust air, as this may cause the device to shut down even if the enclosure
temperature is with the acceptable operating temperature range.
CAUTION:
Avoid usage of Q9 in dusty environments.
