24
Advanced Feature
To access the
Advanced
menu and adjust the settings, perform the following steps:
1. Enter the
OSD
menu.
2. Press the ◄ or ► button to select the
Installation II
menu.
3. Press the ▲ or ▼ button to select the
Advanced
menu and then press .
4. Press the ▲ or ▼ button to move the cursor up or down in the
Advanced
menu.
5. Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
OSD Menu Setting
Press to enter the OSD setting menu. See page 25 for more
information on OSD Menu Setting.
Peripheral Test
Press to enter the Peripheral Test menu. See page 25 for
more information on Peripheral Test.
3D
Press to enter the 3D menu. See
3D
on page 26.
Note:
To use the 3D function, the Play Movie in 3D setting found in your player under the 3D Disc
Menu must be enabled. 3D functionality works when the input source supports 120Hz.
1.
The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.
2.
When the projector is connected to an appropriate 3D source, the 3D OSD menu item is
enabled for selection.
3.
Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D DVD or 3D media file.
5.
You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection
feature).
6.
You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install
a driver on your PC and connect a USB emitter.
7.
The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).
8.
Power on the glasses. Glasses normally have a power on-off switch. Each type of glasses has
their own configuration instructions. Please follow the configuration instructions that come with
your glasses to finish the setup process.
Summary of Contents for Qumi Q2-L Series
Page 1: ......
Page 21: ...15 OSD Sub Menu Overview ...
Page 42: ...36 Qumi Dimensions 160 0mm 6 3 102 4mm 4 03 32 3mm 1 27 160 0mm 6 3 ...
