12
Chapter 3 On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you to make
adjustments and changes to settings, such as display settings and audio settings. There
are 5 menus within the OSD menu:
• Image – Various aspects of the image quality can be adjusted in this menu.
• Computer – Settings for personal computers can be adjusted in this menu.
• Video/Audio – Many settings for video and audio can be adjusted in this menu.
• Installation I – Default language and other settings can be adjusted in this menu.
• Installation II – Factory reset and other settings can be adjusted in this menu.
If the interface is set on AV-IN, HDMI or Universal I/O, the OSD menu can be accessed by
pressing the MENU button on the remote control or keypad.
Note:
If the OSD menu is inactive for 15 seconds, the OSD menu will close.
Navigating the OSD
The remote control cursor buttons or the buttons on the top of the Qumi can be used to
navigate and make changes to the OSD settings.
1. Enter the
OSD
menu.
2. Press the ◄ or
► button to move
through the 5 menus.
3. Press the ▲ or ▼
button to move the
cursor up and down
within in a menu.
4. Press ◄ or ► to
change the values for
specific settings.
5. Press
MENU
button
or
Exit
on the remote
control to close the
OSD or close a
submenu.
Note:
Depending on the video source, not all items in the OSD can be modified. For example,
the Horizontal/Vertical Position items in the Computer menu can only be modified when
the Qumi is connected to a PC through a VGA cable. Settings that are not enabled or that
cannot be modified are gray in color.
Summary of Contents for Qumi Q2-L Series
Page 1: ......
Page 21: ...15 OSD Sub Menu Overview ...
Page 42: ...36 Qumi Dimensions 160 0mm 6 3 102 4mm 4 03 32 3mm 1 27 160 0mm 6 3 ...