Vivitek DU6675, User Manual

Page: 41 / 54

DU6675/DW6655/DX6635 User Manual
40
3D
Set the 3D format and 3D sync signal. The projector detects the signal type and display the available options for
setting, the unavailable option is grayed out. Before performing the 3D setting, ensure that the input signal is
connected. When there's no input signal, 3D setting can not be performed.
3D Format
Select this option and press the Enter button to enable 3D replay and set 3D option.
Off: Turn off the 3D Display Mode. When Auto, Side by Side, Top/Bottom or Frame Sequential is selected, the
3D mode will be turned on. To turn off the 3D Mode, select "Off" and press the Enter button.
Auto: Enable the 3D format to automatically detect the formats of Side by Side, Top/Bottom and Frame
Sequential. This function may only be enabled for the input signal below
- The input signal is HDMI 1.4a 3D.
- The HDMI 1.4a 3D signal connects to the projector through HDBaseT transmitter.
Side by Side: Manually switch the 3D Format to Side by Side. This option is only applicable to the HDMI input
signal or the HDMI signal sent using HDBaseT transmittes
Top/Bottom: Manually switch the 3D Format to Top/Bottom. This option is only applicable to the HDMI input
signal or the aforementioned signal sent through the HDBaseT transmitter.
Frame Sequential: Set the format to Frame Sequential.
DLP Link: Set to activate or deactivate the DLP Link sync. signal.
3D Swap: If the 3D imaged viewed through the 3D glasses for the left and right eyes are inverse, set the 3D Swap to
"Inverse". If the images are normal, keep the current.
3D 24Hz Display: Set the 3D 24Hz image frame rate to 144fps or 96fps, this option is only applicable when the input
signal is 24Hz.
Filter Message
This function allows you to set interval time to display a message for cleaning the filter, the available options are Off,
100H, 200H, 500H and 1000H. Please make sure to reset the filter Message after cleaning the filter.
Caution:
The people listed below shall be aware when watching 3D images:

Children under six years in age

People who are allergic to light, unhealthy and have the history of cardiovascular

People who are tired or lack of sleep

People who are under the impact of drug or alcohol

Normally, it's safe to watch 3D images. However, some people might feel uncomfortable.

Refer to the guidelines revised and released by the 3D League on December 10, 2008.
 People need to take a break for at least 5 to 15 minutes every thirty minutes or one hour
Note:
 The projector provides DLP Link and 3D IR sync. After the 3D Mode is enabled, the built-in DLP Link or external
3D IR transmitter can be used to synchronize the signal of the 3D glasses. Or, you may turn off the DLP Link
sync signal and only select the external 3D IR transmitter to synchronize the 3D signal..