Vivitek DU6675, User Manual

Page: 26 / 54

DU6675/DW6655/DX6635 User Manual
25
Connecting to External HDBaseT Transmitter
The projector has a built-in HDBaseT receiver. With HDbaseT Transmitter (optional), the video, RS-232 and LAN
signals can be sent to the projector via a single RJ-45 cable. If the Digital Transmitter you purchased supports the
input and output of the IR remote control, the control signals from the IR remote control can be sent to the
DU6675/DW6655/DX6635 projector via the RJ-45 cable.
Note:
 The projector supports the video signal, R-232, IR remote control and the reception of the network control
signals but do not support Power over Ethernet (PoE).

Set the INSTALLATION -> RS232 -> Channel on the OSD menu to HDbaseT if you want to use the external
HDbaseT transmitter to send the RS232 command to the projector via the RJ45 cable and baud rate will
switch to 9600.

If the command is sent via the HDbaseT transmitter, the longest transmission distance is 100 meters. The
projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance is
exceeded.

Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage, interfere signal
transmission, reduce the transmission distance and degrade the image quality.