Vivitek DU6675, User Manual

Page: 14 / 54

DU6675/DW6655/DX6635 User Manual
13
Installation and Setup
Precautions For installation

Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way other
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead to other
unpredictable damages.
 Allow at least 50 cm clearance around the exhaust vent.
 Ensure that the intake vents do not recycle hot air from the exhaust vent.
 When operating the projector in an enclosed space, ensure that the surrounding air temperature within
the enclosure does not exceed operation temperature while the projector is running, and the air intake
and exhaust vents are unobstructed.
 All enclosures should pass a certified thermal evaluation to ensure that the projector does not recycle
exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the
acceptable operation temperature range.
Caution:
Ceiling installation must be done by a qualified professional. Contact your dealer for more information. It is not
recommended you install the projector yourself.
Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is dropped