DH6671 DLP Projector - User's Manual
9
Projector Overview
Front-right View
1
8
9
7
10
11
6
5
3
4
2
Rear-right View
14
15
13
16
12
1.
Lamp Cover
Remove cover to replace lamp or color
wheel.
2.
Lens Hood
Remove lens cap before use.
3.
Control Panel
Press the button to operate the OSD menu
or adjust the lens settings, refer to OSD
controls.
4.
LED Indicator
Displays current projector status such as
power, temperature and lamp.
5.
Front IR Receiver
Receives for IR signals from remote control.
6.
Lens Release Button
Press the Lens Release button before
removing the lens.
7.
Intake Vent
Lamp cooling vent – do not obstruct.
8.
Anti-thief Screw hole
The anti-thief screw can be fasten to
prevent Lens removing.
9.
Height Adjuster
Adjust level of projector.
10.
Intake Vent / filter
The fans pull cool air to the projector for
system cooling.
11.
I/O Connector Panel
Connect to various input, control or output
terminals to the projector.
12.
Rear IR Receiver
Receives for IR signals from remote control.
13.
Rear Intake Vent / filter
Rear cooling intake – do not obstruct.
14.
Kensington Lock
Attach the projector to a permanent object
with the Kensington slot and a security
cable.
15.
Security Chain Lock
Attach the projector to a permanent object
using a security cable.
16.
Carrying Handle
Pull up the handle when carrying the
projector.
Important:
Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not
obstruct any of the grill openings
