DH6671 DLP Projector - User's Manual
27
Connecting to External HDBaseT Transmitter
The projector has a built-in HDBaseT receiver. With HDBaseT transmitter (optional), the
video, RS-232 and LAN signals can be sent to the projector via a single RJ-45 cable. If
HDBaseT you purchased supports to output the IR remote control, the control signals from
the IR remote control can be sent to the DH6671 projector via the RJ-45 cable.
VGA IN
RJ45
Lan
HDMI
RS232
RJ45
YPbPr
Note:
•
The projector supports the video signal, R-232, IR remote control and the reception of the network control
signals but do not support Power over Ethernet (PoE).
•
Set the INSTALLATION -> RS232 -> Channel on the OSD menu to HDBaseT if you want to use the
external HDBaseT transmitter to send the RS232 command to the projector via the RJ45 cable, the baud
rate will switch to 9600 automatically.
•
If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters. The
projector may be interrupted or interfered, or the control signal cannot be sent if the transmission distance
is exceeded.
•
Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage, poor signal
transmission, or reduce the transmission distance and degrade the image quality.
Control PC
Control PC
VGA Cable
DVD Player
DVD Player
Hub
RS-232
RJ-45 Cat5e or above
HDBase T transmitter
Projector
