- 12 -
6 D-Point 2 Pull-up Menu
After you run the D-Point 2 by double clicking D-Point 2 icon
on the desktop,
D-Point 2 icon will be shown in the system tray.
Right button click D-Point 2 icon in windows menu bar, then pull up menu appears.
Label
Description
Configuration
Only when you want to change mounting position of Projector,
to change
language, click this menu and follow the step “5.
Configuration”.
Alignment View
Same as “ Alignment View” function of Configuration.
Auto Calibration
If the accuracy is not enough during when you use D-Point 2,
do “Auto Calibration” again.
Manual Calibration
If the accuracy is not acceptable or Auto Calibration fails, select
“Manual Calibration”.
Pen Mode
Mark when used with IR pens.
Finger Touch Mode
Mark when used with
DT01
module (optional).
Virtual Keyboard
If keyboard input is needed, click
on the “Virtual Keyboard” then
the keyboard will appear on the screen.
Run i- Draw
When you want to run “i- Draw”, then click.
About D-Point 2
This menu provides D-Point 2 version information. Click this
menu, and then version information window will be appeared.