English
Downloading Pictures from the Camera
Once you have TWAIN driver and PhotoSuite software installed in your PC, you may
start download pictures from this digital camera.
PC
MAC
Note
If your camera's memory is full, you must remove pictures from memory before capturing new
ones. To save pictures, transfer them from the camera to your computer. When your camera's
memory is full, the green Status light indicator will flash once every second.
Note
●
The camera's RS232 interface can be set to transmit data at varying baud rates depending
upon the capabilities of your computer.
●
When the camera is attached to your computer and remains inactive for a period of time
greater than the Auto Power Off interval, it shuts down automatically.
●
When the camera is attached to your computer, all the functional buttons are disable except
the power I/O button.
Connecting to your Computer
Before you can start downloading images, you need to connect your digital camera to a
computer. Here are ways of connecting the camera to your computer.
For RS232 interface:
(Optional for Macintosh)
1. Plug one end of the serial cable into the COM port on a PC or modem port on a
Macintosh located at the back of your computer.
2. Connect the other end of the serial cable to the camera.
3. Turn on your camera.
22
Modem
port
