English
18
To select the type of compression for saving pictures in the camera's memory:
1. Make sure that the camera is in Record mode. Then press the Mode/Menu mode
button for over 2 seconds to switch to Menu mode.
2.To select a low compression, scroll down the options until N appears on the LCD panel.
Then, press the Shutter release button to select the option.
3. To select a high compression, scroll down the options until F appears on the LCD
panel. Then, press the Shutter release button to select the option.
Setting the Self-Timer
The Self-Timer creates a 10-second delay between the time you press the Shutter re-
lease button and the time the picture is taken. You can activate the Self-Timer by se-
lecting the Self-Timer On option in Menu mode. The 10-second delay is indicated by the
Status light indicator flashing once per second for seven seconds, then twice per sec-
ond for the last three seconds.
After a picture has been taken, the Self-Timer sets off automatically. You will need to
enter Menu mode and turn on the Self-Timer every time you want to use it.
Setting the Flash Mode
The camera has two different flash modes:
●
Off (default) - The flash is disengaged no matter what the ambient brightness of the
surroundings is.
●
Auto - The camera automatically fires the flash when the brightness of the subject or
scene is too low.
To set the Flash mode:
1. Make sure that the camera is in Record mode.
2. Use the Back/Flash button to choose the desired Flash mode. The currently selected
Flash mode will be indicated on the LCD Panel with the following icons:
- Off
- Auto
Note
●
Auto-Flash will be disabled automatically when connected on USB Because the large charge
current will cause the damage to your USB interface.
●
Do not use the Flash or Auto-Flash features while battery power is low. (It will cause the
camera to be kept in charging status always.)
