10
How do I Erase Pictures so I can take more?
Erasing old pictures is simple. There are three ways.
1) Every time you transfer images from ECam to your
computer, the images will be moved out of ECam to your
computer and now ECam is "empty" and ready to take 24
more images.
2) If ECam's memory is full, the red LED on the back (item 12)
will be a bright, steady. You can erase all 24 images if you
hold the shutter button (item 2) for more than three
seconds. You will hear many rapid beeps and the Red LED
will turn off. ECam memory is now empty.
3) You can open the battery door and remove the battery for
several seconds. This will erase all images in ECam's
memory even if memory was not full.
What do the red LEDs Mean?
If you see this -
ECam is saying -
The LED on the back of ECam
is a bright, steady RED
ECam's memory is full. All 24
images have been taken
The LED on the front of ECam
is flashing
ECam is going to take a picture in
self timer mode, after the tenth
flash
