7
Powering
the
Camcorder
ON
Battery Installation
Make sure the batteries have been inserted properly into your digital camcorder.
Use 2x AA (1.5V) batteries. Alkaline batteries are recommended. (Batteries not included.)
1. Release and open the battery compartment door.
2. Install the batteries into the battery compartment as illustrated above.
3. Close the battery compartment door.
NOTE:
Remove the batteries from the camcorder when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
Some features will not work if the battery power level is low.
The energy status of the battery power level is displayed on LCD screen as shown below:
Full battery power
Medium battery power
Low battery power
