Vivint Smart Hub Panel?, User'S Quick Start Manual

Page: 26 / 33

Auto Stay
The Auto Stay option will change the arming mode if no one exits after arming
the system in Leave Mode. When the system is armed in the Leave Mode the
Exit Delay will begin.
With the Auto Stay option on, if a designated exit/entry door does not open
and close during the Exit Delay, the system will arm in the Stay Mode instead
of the Leave Mode.
l
Off
l
On
Key Fob Arm/Disarm Sound
The system can be set so when it’s armed or disarmed by a wireless key fob, a
beep will sound through the internal and external sounders to indicate that the
key fob’s signal was received.
This helps in installations where the panel is not visible or there are no other
system status indications at the key fob’s location.
l
Off
l
On
Key Fob Disarm After Sound
The system can be set so when it’s disarmed with a wireless key fob after an
alarm has occurred, a special series of beeps will sound through the internal
and external sounders.
This option serves as an alert to warn you to approach the home with caution
as an intruder may still be present.
l
Off
l
On
IMPORTANT: The system can be set so when it’s disarmed with a wireless key
fob after an alarm has occurred, a special series of beeps will sound through
the internal and external sounders. This option serves as an alert to warn you to
approach the home with caution as an intruder may still be present.
Key Fob Options
The installer selects which options are enabled for each key fob (1
‐
8) used with
the system.
Refer to the table below for the options selected for your key fobs:
23