45
Setup Menu
Auto Adjustment
Force the display to reacquire and lock to the input signal (VGA source only). This is
useful when the signal quality is marginal. Note: This feature does not continually
reacquire the signal.
Options: No, Yes
Default:
No
H. Position
Adjust the horizontal position of the image (VGA source only). Press
or
to select
the desired level, and then press
ENTER
.
Range: 0~100
Default:
50
V. Position
Adjust the vertical position of the image (VGA source only). Press
or
to select the
desired level, and then press
ENTER
.
Range: 0~100
Default:
50
Phase
Adjust the phase of the displayed signal (VGA source only). Press
or
to select the
desired level, and then press
ENTER
.
Range: 0~100
Clock
Adjust the clock of the displayed signal (VGA source only). Press
or
to select the
desired level, and then press
ENTER
.
Range: 0~100
Zoom
Adjust the zoom (overscan) of the image. Press
or
to select the desired level, and
then press ENTER.
Range: 10 steps
Power LED
Enable or disable the status LED
Options: On, Off
Default:
On
Real Time Clock
Set the internal clock of the display, and to power on and off the display at preset times
if desired.
Options: User mode, Workday mode, Everyday mode
Default:
Everyday mode
Summary of Contents for VTS-8510
