![VIVESS HT9001SW Manual Download Page 23](http://html1.mh-extra.com/html/vivess/ht9001sw/ht9001sw_manual_1038672023.webp)
23
English
size: A5
6. Operating instructions
6.1 Unpacking and inspecting the product
•
Remove the product and accessories carefully from the original packaging. It is recommended to
keep the original packaging for storage. If you wish to dispose of the original packaging, please
observe applicable legal provisions. Should you have any questions regarding proper disposal,
contact your local waste management center.
•
Inspect the delivery contents for completeness and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet immediately.
6.2 Intended use
This product is suitable for drying hair only. Any other use may result in damage to product or injuries.
This product is not intended for commercial use. It is designed for household use only.
6.3 Operation
1. If necessary, attach the Concentrator (2) or the Diffuser (3) onto the appliance. You may facilitate
styling your hair in the desired way by rotating the attachments and targeting the concentrated air.
2. Turn on the appliance using the temperature switch (7) and fan speed switch (6). Select the desired
level.
3. Turn off the appliance after use and unplug the power cord.
Level
Fan speed
Level
Temperature
0
appliance switched off
Low temperature
Weak air flow
Medium temperature
Strong airflow
High temperature
Warning - Risk of burns!
The Concentrator (2) and the Diffuser (3) are very hot during operation.
6.4 Cold air / turbo button
•
Press the cold air button (8) to stop the stream of warm air and immediately switch to cold air.
•
Now you can fix your hair with cold air. When you release the cold air button, warm air is produced
immediately if the temperature switch (7) is set accordingly.
•
If you press the turbo button (9), an even stronger air flow than at max. fan speed is generated. The
turbo button works only at max. fan speed, temperature settings remain unchanged.
HT9001SW_A5_130917.indb 23
17/9/13 2:34 PM