3
The Master Thermostat Tech setting for the
outdoor remote sensor must be set to
YES
. See the
master thermostat manual for instructions.
While the
Master Thermostat
is on the
Outdoor Sensor
screen with YES selected, hold down the connection button
on the inside of the
Outdoor Remote
until the
Master Thermostat
shows the letters
YE
and says
Found Outdoor
.
1.
2.
Connecting to the Master Thermostat
Installation Tip
Example Step 2.
The Master Thermostat Found Outdoor Screen.
For installations where the temperature will be frequently below freezing,
battery life may be much better with 2 AA lithium batteries.
Easy, two step communication link set up.
Connection button
located inside the
Remote Sensor
Important:
DO NOT press the connection
button again after Step 2 above
has been completed. Pressing
the button a second time will
break the communication link
and the connection steps will
have to be repeated.
ESTABLISHING COMMUNICATION
Inside of Sensor
FSK/ ASK Switch
Remember
Our Wireless System contains selectable wireless
communication. Each component has a jumper switch
labeled FSK and ASK. Default setting: FSK. All components
must be set to the same position for wireless communication.
This selectable communication option is available to you in
case you have a device you are pairing with that only has
the ASK option.