Inserting Batteries for Permanent Wall Mount
1
Remove the thermostat
from the subbase. It is
held on the subbase by a
plastic tab on the bottom
of the remote sensor.
Push in with a small flat
head screwdriver to remove
it from the subbase.
2
Installing Batteries for Temporary Wall Mount or Table Placement
1
Use the finger tab on the back of the
remote to remove the battery door.
2
Once you have removed the door from the back
of the remote, insert 2 AA Alkaline batteries and
replace the battery door.
5
INSTALLING BATTERIES
Once you have
removed it
from the subbase,
insert 2 AA Alkaline
batteries.
3
Attach the thermostat
to the subbase by
aligning the two top
tabs and then close
as shown.
Bottom of
Thermostat
Top tabs
Swing closed
Inside view
Reset button
