background image

Programming

Features

If   appears in the display, then the keypad is locked.  All or some of 

the keys will not work. Hold the          and          keys for 3 seconds to 

remove the lock. Use the same procedure to lock the display

Keypad Lockout Note:

Temporary Hold: 

The thermostat will display 

Hold

 and 

Run 

Schedule 

on the bottom of your screen when you press the        or         

key. If you do nothing, the temperature will remain at this setpoint 

temporarily until the next program time period. After this, the 

program setpoint will then replace your temporary setpoint.

Permanent Hold:

 With a temporary hold set, if you press the 

HOLD

 

key at the bottom of your screen, you will see 

HOLD

 appear below 

the setpoint temperature in the display. The thermostat will now 

permanently stay at this setpoint and can be adjusted using the  

          or        keys.

To Return To Program: 

Press the 

Run Schedule

 key at the bottom of 

your screen to exit temporary and permanent holds.

Temporary & Permanent Hold Feature

A Note About Programmable Fan:

The programmable fan feature will run the fan continuously during 

during any time period when it is programmed to be on. This is the best 

way to keep the air circulated and to eliminate hot and cold spots in your 

building. 

Summary of Contents for TP-S-905











Reviews: