background image

Set 5/1/1 Day Program Schedule

1. 

 Select 

HEAT 

or

 COOL 

with the system key. 

      You have to program heat and cool each separately. 

2.

  Press the 

MENU

 

3.

  Press 

SET SCHEDULE

.  

Note:

 Monday-Friday is displayed and the

      

WAKE 

text is shown. You are now programming the 

      

WAKE

 time period for the weekday setting.

4.

  Use the             or           key to make your time selection for the

      weekday 

WAKE 

time period.  

Note:

 If you want the fan to run 

      continuously during this time period, select 

ON

 with the 

FAN 

key.

5.

  Then use the           or        key to make your setpoint selection for

      the weekday 

WAKE

 period.

6.

  Press 

Next Step.

7.

  Repeat steps 4 through 6 for weekday 

LEAVE

 time period, 

      

RETURN

 time period, and for the 

SLEEP

 time period.

  

To customize your 5/1/1 program schedule, follow these steps:

Weekday:

Programming

Programming

A Note About Auto Changeover:

When in Auto you have the ability to switch between auto heat or auto 

cool by pressing the system key. This can be done once the current 

mode has reached its setpoint. For example: if in auto heat, the heat 

setpoint must be satisfied before the thermostat will allow you to switch 

to auto cool. You can switch out of auto by holding down the system 

key. To get back into auto, you must toggle the system key to auto.

Repeat steps 4 through 6 for the Saturday 

WAKE 

time period, 

LEAVE 

time 

period, 

RETURN

 time period, and for the Saturday 

SLEEP

 time period.

Saturday:

Repeat steps 4 through 6 for the Sunday 

WAKE 

time period, 

LEAVE

 time 

period, 

RETURN 

time period, and for the Sunday 

SLEEP

 time period.

Sunday:

Summary of Contents for TP-S-905











Reviews: