Vivax Y-DESIGN ACP-09CH25AEYI, User Manual

Page: 162 / 209

14
Troubleshooting
SAFETY PRECAUTIONS
If ANY of the following conditions occurs, turn off your unit immediately!
•
The power cord is damaged or abnormally warm
•
You smell a burning odor
•
The unit emits loud or abnormal sounds
•
A power fuse blows or the circuit breaker frequently trips
•
Water or other objects fall into or out of the unit
DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AUTHORIZED SERVICE
PROVIDER IMMEDIATELY!
Common Issues
The following problems are not a malfunction and in most situations will not require
repairs.
Issue Possible Causes
Unit does not turn on when
pressing ON/OFF button
The Unit has a 3-minute protection feature that
prevents the unit from overloading. The unit
cannot be restarted within three minutes of being
turned off.
The unit changes from
COOL/HEAT mode to FAN
mode
The unit may change its setting to prevent frost
from forming on the unit. Once the temperature
increases, the unit will start operating in the
previously selected mode again.
The set temperature has been reached, at which
point the unit turns off the compressor. The unit
will continue operating when the temperature
fluctuates again.
The indoor unit emits white
mist
In humid regions, a large temperature difference
between the room's air and the conditioned air
can cause white mist.
Both the indoor and
outdoor units emit white
mist
When the unit restarts in HEAT mode after
defrosting, white mist may be emitted due to
moisture generated from the defrosting process.