Vivax Y-DESIGN ACP-09CH25AEYI, User Manual

Page: 158 / 209

10
Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don't need
the same temperature settings to stay comfortable). This function can only be
activated via remote control.
Press the
SLEEP
button when you are ready to go to sleep. When in COOL mode,
the unit will increase the temperature by 1°C (2°F) after 1 hour, and will increase an
additional 1°C (2°F) after another hour. When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour, and will decrease an additional 1°C (2°F)
after another hour. And the fan speed is low.
It will hold the new temperature for 6 hours, then the sleep operation stops, the unit
will revert back to the previous operation mode, but the temperature will not change.
Note:
The SLEEP function is not available in FAN or DRY mode.
SLEEP OPERATION