Vivax TV-55UHD122T2S2SM, Instruction Manual

Page: 243 / 284

VIVAX
ENG
24
CONNECTION INSTRUCTIONS
• Connecting an Aerial
To view television channels correctly, a signal must be received by the set
from the following source:
• An outdoor VHF/UHF antenna or Satellite Dish (option).
• Connecting HDMI
Supports digital connections between HDMI -enabled A/V devices such as
(PVRs, DVD, Blu-Ray, HD-DVD, AV receivers and digital devices). No sound
connection is needed for HDMI to HDMI connection.
► NOTE
Some devices such as a PVR or DVD players require a HDMI signal to be set to output in
the device's settings. (Please consult your device user manual for instructions.)
What is HDMI?
• HDMI, or high-definition multimedia interface, is a high resolution interface
that enables the transmission of digital audio and video signals using a single
cable without compression.
• "Multimedia interface" is a more accurate name for it especially because it
allows multiple channels of digital audio (5.1 channels).The difference
between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi -channel digital audio.
• Use the HDMI terminal for HDMI connection to a compatible device. If your
external device has DVI only, you should use a DVI-to-HDMI cable (or
adapter) for the connection, and the "R - AUDIO - L" terminal on DVI for sound
output.
• Connecting Component Devices (DVD/PVR) Connect Component video and
audio cables to Component inputs ("Y"(Green), "PB"(Blue), "PR"(Red)) on the
rear of your set and the other ends to corresponding component video out
connectors on the source (PVR, DVD, etc)
The Y, PB and PR connectors on your component devices (PVR or DVD) are
sometimes labeled Y, B-Y and R-Y or Y, CB and CR. (Colours for inputs and
cables must correspond on both devices.)
► NOTE
Some devices such as a PVR or DVD player require a "Component/YPBPR" signal to be
set to output in the devices settings. (Please consult your device user manual for
instructions.)
• Connecting External A/V Devices
Connect a Video RCA cable to an appropriate external A/V device such as a
VCR, DVD or Camcorder.
Connect RCA audio cables to "R (Right/Red) - AUDIO - L (left/White)" and
Video cable with yellow connector to the "AV"(Yellow) input on the rear of your
set and the other ends to corresponding audio and Video out connectors on
the A/V device.