Vivax FS-20WPR, User Manual, Page: 71 / 92

VIVAX
ENG
8
FUNCTION INTRODUCTION
I. Before using the fan, make sure that it is on a flat and stable surface. Damage
may occur if the fan is placed on an incline or decline.
II.
Insert the plug directly into a standard AC socket-outlet. Be sure that the plug
fits tightly into the socket-outlet.
1. ON/OFF
Connect the power plug into the Power Supply socket. The power indicator light is
ON and the fan is in STANDBY mode. Press
"ON / OFF" once, and the air fan starts
to work. Press " ON/OFF " button again, all the indicators are OFF, the fan stops
working, and the power indicator is always on (Standby).
NOTE: If you will not use the appliance for longer time, please disconnect main power plug from
the power socket.
2. SPEED
After turning on the air fan, press "SPEED" button once.
Press “SPEED” continuously, and the wind speed will be switched in order of “Low-
Mid-High range”.
3. TIMER
1. In the power-on state, press " TIMER " once, the "0.5h" indicator lights up, and press
" TIMER " again. At this time, 0.5 hour is added to the original time, the "0.5h"
indicator goes out, and the "1h" indicator turns on. After pressing each time to
increase 0.5 hours to a maximum of 7.5 hours. Press "
TIMER " again, all time
indicators will go Off (it is considered as canceling the timer function). The fan will
turn off automatically when the set time is reached.
2. In the standby mode, press " TIMER " button once, the "0.5h" indicator and the low-
level indicator are on, and then press " TIMER " again. At this time, 0.5 hour is added
to the original time, the "0.5h" indicator goes out, and the "1h" indicator turns on.
After pressing each time to increase 0.5 hours to a maximum of 7.5 hours. Press
"
TIMER " again, all time indicators will go Off (it is considered as canceling the timer
function).
After you set the scheduled turn On Timer, you can adjust "
Air speed " and " Swing "
function.
The fan will turn On automatically when the set time is reached.
Each
TIMER button adjust timer time in the following circle: 0,5 to 7,5h:
LED
Light
(h)
0,5 1 0,5+1 1+1 0,5+2 1+2 0,5+1+2 4 ... 0,5+1+2+4
No
LED
lights
Hour(s) 0,5h 1h 1,5h 2h 2,5h 3h 3.5h 4h ... 7,5h
Timer
Off
4. SWING (
Setting of oscillate wind direction)
Press the „ SWING “ button to turn on the fan head rotation. The indicator light will turn on.
Press "SWING" button again, the indicator light will turn off, and the fan oscillation will
stop.