Vivax ACP-18COFM50AEEI, User Manual, Page: 22 / 110

Stop the air conditioner immediately if one of the following faults occur. Disconnect the
power and contact the nearest customer service center.
If the E( 0,1 ........) or P( 0, 1 ....... ) code appears on the LED(LCD)window, disconnect the
power and contact the service people.
Trouble
Fuse blows frequently or circuit breaker trips frequently.
Other objects or water penetrate the air conditioner.
The remote controller won't work or works abnormally.
Other abnormal situations.
Malfunctions Cause What should be done?
Unit does not
start
Power cut Wait for power to be restored.
Unit may have become unplugged.
Check that plug is securely in wall
receptacle.
Fuse may have blown. Replace the fuse.
Battery in Remote controller may have
been exhausted.
Replace the battery.
The time you have set with timer is
incorrect.
Wait or cancel timer setting.
Unit not cooling
or heating
(Cooling/ heating
models only)
room very well
while air flowing
out from the air
conditioner
Inappropriate temperature
setting.
Set temperature correctly. For detailed
method please refer to "Remote controller
instruction" section.
Air filter is blocked. Clean the air filter.
Doors or Windows are open. Close the doors or windows.
Air inlet or outlet of indoor or outdoor unit
has been blocked.
Clear obstructions away first, then restart the
unit.
Compressor3minutes protection has been
activated.
Wait.
If the trouble has not been corrected, please contact a local dealer or the nearest customer
service center. Be sure to inform them of the detailed malfunctions and unit model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorised service provider.
TROUBLESHOOTING TIPS
20