Vivax ACP-09CH25AECI, User Manual

Page: 225 / 264

4
1. ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
2. MODE Button
Each time the button is pressed, the operation
mode is selected in a sequence of following:
NOTE-.
Please do not select HEAT mode if the
machine you purchased is cooling only type. Heat modeis not
supported by the cooling only appliance.
3. Swing < Button
Used to stop or start horizontal louver movement or set the
desired up/down air flow direction. The louver changes 6 degree
in angle for each press. If keep pushing more than 2
seconds, the louver will swing up and down automatically.
4.
Swing «» Button
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. And indoor unit displays '
V
V '
for one second. If holding down for more than
2 seconds, the vertical louver swing feature is
activated. The indoor unit displays ' IIII' ,
flashes four times, then the temperature
setting reverts back. If the swing feature is
stopped, it displays ' LC' and remains on for
3 seconds.
NOTE: For some units , the indoor units
display ' ' when the swing feature is
activated, and display ' ' when the swing
feature is stopped.
5. SLEEP/FRESH(optional) Button
Active/Disable SLEEP function. If f l ushing
more than 2 seconds, the ' FRESH ' function
will be activated, pushing more than 2
seconds again to disable.
NOTE:
While the unit is running under SLEEP
mode, it would be cancelled if press the MODE,
FAN SPEED or ON/OFF button.
Function buttons