Vivax Metrotech vCamMX-2, Training

Page: 51 / 67

Removing and Installing
the Type-MX spring assembly
Remove any excess dirt that might come into contact with the gold pins or green circuit
board. Check that the O-rings are in good condition.
Grasp the termination base in one
hand while unscrewing or screwing on
the spring assembly.
Screw on the spring assembly or
camera head until the O-Rings are no
longer visible.
Hand tighten the camera head and spring assembly. Do not use any tools.
Try not to touch the green circuit board or gold pins on the spring assembly or
camera head with bare hands.
1
2
3
4
51