Vivax Metrotech vCamMX-2, Training

Page: 49 / 67

Try not to touch the green circuit board or gold pins on the spring assembly or camera head with
bare hands. Touching these can transfer oils from the fingers to these components which may lead
to corrosion. Wear clean rubber gloves if possible.
Removing and Installing the MX Camera Head
Remove any excess dirt that might
come into contact with the gold pins or
green circuit board. Check that the O-
ring is in good condition.
Grasp the termination
spring close to the base of
the camera head.
Present the camera head to the spring
and turn the camera head clockwise
until the O-Ring is no longer visible.
Hand tighten the camera
head. Do not use any tools
to tighten the camera head.
1 2
3 4
49
Keep a spare O-ring in your supply box. Ask your local distributer for the part number.