40°C) or too low (below 0°C) temperatures,
because, for example, dust and water vapour
particles can trigger a false alarm sooner or
later.The highest point under pitched roofs is
also not suitable.
Installation and attachment
NOTE: The enclosed attachment material is
only suitable for concrete or wooden ceilings.
For attachment to other substrates please
purchase commercially suitable attachment
material.
1.Open the smoke alarm by gently turning the
housing base anticlockwise.
2.Now use the housing base with itstwo holes
as a template for ceiling mounting. Mark the
positions of the two holes with a pencil.
3.Check the borehole positions with the pipe
and cable tester to see whether they etc free
of electricity, gas and other pipes. If pipes or
cables are detected, select a different
location.
4.For drilling in concrete or masonry please
use a 5.5mm diameter drill. Drill ca. 25 –
30mm deep. Make sure that the dowels stay
in the drill holes, if not, find another position
for the smoke alarm or use a stronger
fastening material which you can buy in
13
Apartments
Minimum and optimum protection
of apartment and houses from smoke
= optimum protection
= minimum protection
Sleeping room
Sleeping
room
Bath room
Stair case
Kitchen
Living room
Residential building
Sleeping room
Stair case
Sleeping room
Sleeping room
Kitchen
Bath
room
Living room
Manual 33510-2014-Rev7-RZ.qxp_Layout 1 30.09.15 15:02 Seite 13
