Arm Blood Pressure Monitor
H358
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/09/20
moderate injury to the user or patient or damage to the equipment or other property.
(General usage)
1)
NOTE THAT PATIENT motion, trembling, shivering may affect the measurement reading.
2)
Remove the arm cuff if it does not start deflating during the measurement.
3)
Do not use the device for any purpose other than measuring blood pressure.
Use only the special arm cuff (cuff circumference: 22cm~32cm) provided by the manufacture for this
device. Use of other arm cuffs may result in incorrect measurement results.
4)
Do not use in a location with moisture, or a location where water may splash on the device.
5)
Do not use the device in a moving vehicle (car, airplane).
6)
Precision components were used in the construction of this device. Extremes in temperature, humidity,
direct sunlight, shock or dust should be avoided.
7)
Avoid folding the cuff tightly or storing the tube tightly twisted for long periods, as such treatment may
shorten the life of the components.
8)
Measurements may be impaired if the device is used close to televisions, microwave ovens, mobile
telephones, X-ray or other devices with strong electrical fields.
9)
Used equipment, parts and batteries are not treated as ordinary household waste, and must be disposed
of according to the applicable regulations.
10)
Please keep the pressure of the arm cuff under 295mmHg (39.9kPa). Inflating to a higher pressure than
necessary may result in bruising and numbness where the arm cuff is applied.
11)
Changes or modifications not approved by our company will void the user warranty. Do not disassemble
or attempt to repair the unit or components by yourself.
12)
If the appearance of the cuff is found to be damaged, do not take blood pressure measurements. It may
damage your skin.
13)
Do not forcibly crease the arm cuff or the air tube excessively.
14)
Do not press the air tube while taking a measurement.
15)
Do not expose the device to strong shocks or vibrations.
16)
Do not inflate the arm cuff when it is not wrapped around your arm.
17)
Do not use the device outside the specified environment. It may cause an inaccurate reading.
18)
The accuracy of the product has been tested. It is generally recommended to calibrate the device once
every year to ensure that the device is functioning properly and accurately.
19)
Do not calibrate the product yourself. If it is necessary to calibrate, please contact a qualified technician.
20)
Do not use the device outside the specified environment. It may cause an inaccurate reading.
21)
Do not use the device immediately after removing it from an environment below 5 °C. Leave it in at least
1 hour in a warm environment. It may cause an inaccurate reading.
22)
Dispose of the device and components according to applicable local regulations. Unlawful disposal may
cause environmental pollution.
23)
In case of pressure discomfort or pressure not stopping, immediately turn off the unit or pull out the
tube plug and quickly exhaust.
24)
Avoid eating, drinking tea/caffeine/alcohol, exercising, bathing and smoking for 1 hour before taking a
measurement. Rest for at least 10 minutes before taking the measurement. Before performing another
blood pressure measurement, please rest quiet for 3 minutes, and the rest time allows the artery to
return to the state between blood pressure measurements.
25)
Please measure it in the correct position with quiet, stable mood.
26)
Please do not speak or move your body during measurement.
27)
This product is only applicable to upper arm measurement and is not suitable for measurement of wrist
and other parts.
