Arm Blood Pressure Monitor
H358
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/09/20
8. Maintenance and storage
8.1 Cleaning and Maintenance
The expected service life of this Upper Arm Blood Pressure Monitor is 5 years. To protect your device from
damage, please observe the following:
Do not place the blood pressure monitor and cuff in a high temperature, moisture, water vapour, or
direct sunlight.
Do not tighten the cuff or air tube tightly or roll the air tube on the monitor.
Do not disassemble or attempt to repair the device or components. Changes or modification not
approved by the manufacturer will void the user warranty. Consult Customer Service.
Do not let the blood pressure monitor be strongly impacted or shaken (e.g. the blood pressure monitor
falls on the ground).
Do not use any abrasive or volatile cleaners.
Do not wash the device and any components or immerse them in water.
Use a soft and dry cloth, or a soft and moistened cloth and neutral soap to clean on the monitor and the
arm cuff.
Do not use gasoline, thinner or similar solvents to clean the cuff.
Clean the device if necessary. The necessary cleaning of the frequently contacted parts of the device is
performed once a week.
8.2 Calibration and repair:
1 The accuracy of this device has been rigorously tested and it is generally recommended that the blood
pressure monitor be inspected and calibrated at least every year to ensure that the function is normal and
accurate. The inspection and calibration should be implemented by a qualified technician.
2 Do not attempt to repair the device or components by yourself. Please consult a qualified technician.
8.3 Storage
When not in use, please put it in the storage bag.
1.
Unplug the air plug from the air jack
2.
Keep the tube gently in the cuff and be careful not to fold the tube
3.
Place the unit and cuff in the storage bag, and store them in a clean and safe location
4.
Do not place the unit where it is:
