Arm Blood Pressure Monitor
H358
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/09/20
5.6 User ID, Date & Time, Display Unit, Voice Settings and Memory Clear
* This product provides two display units, mmHg and kPa (Pascal). This manual is illustrated in the unit of
mmHg. The factory default setting is mmHg.
5.6.1 Settings
In the shutdown state, press and hold Setting button
*
indicates the flashing state.
User Switch Setting:
In the shutdown state, press and hold Setting button (about 3 seconds), the User ID symbol
flashes, and then press Memory button to select the User 1 or User 2 .
Date & Time Setting:
After the User Switch Setting, press Setting button to enter the Date & Time Setting. The
Year/Month/Day/Hour/Minute symbol will be flashing, press the Memory button to modify the value. Press
the Setting button to save the settings successfully. If the Date & Time is not adjusted, the default is the
machine factory time.
Display Unit Setting:
After the Date & Time Setting, press Setting button to enter the Display Unit Setting. The screen will display
"PA", while the lower "OFF" will flash. Press the Memory button to switch between "OFF" and "ON".
Selecting "OFF" means selecting mmHg as the unit, and selecting "ON" means selecting KPA as the unit.
Press the Setting button to save the settings successfully.
Voice On/Off Setting:
After the Display Unit Setting, press Setting button to enter the Voice On/Off Setting. The screen will display
"SP", while the lower "ON" will flash, press the Memory button to switch between "ON" and "OFF". Selecting
"ON" means turning on the voice, and selecting "OFF" means turning off the voice. Press the Setting button
to save the settings successfully. The factory default setting is Voice ON.
5.6.2 Memory clear
In the shutdown state press and hold the Memory button (about 3 seconds) to turn on, the symbol
flashes, and then press the Setting button to delete all the measurement results.
