23
9.0 Tightening torque and special tools
Chart 9.0
Nuts head of 8mms
16-18 Nm
Nut flywheel or clutch of 10mms
50-55 Nm
Screws crankcase of 5mms
6-6.5 Nm
Spark-plug
25-30 Nm
Stud cylinder of 8mms
16-18 Nm
Stud exhaust of 7mms
10-12 Nm
Drum and pinion Fly100evo
45-50 Nm
Belt tension Easy100
9-10 Nm
Screws or nuts of 4mm
2.5-3 Nm
Screws or nuts of 5mm
6-6.5 Nm
Screws or nuts of 6mm
9-10 Nm
Screws or nuts of 8mm
25-27 Nm
Screws carbon propeller of 6mms
4-5 Nm
1 Kgm=9.81 Nm
Tools of measurement
Centesimal caliper
Feeler from 0.05 to 1.00 mms
Torque wrench scale 2-10 Nm. Scale 8-60 Nm
Stroboscopic tester and centesimal comparator
Measurer of pressure: scale 0 to 1.0 Bar
Graduated syringe: capacity 20-30mls
Electronic tester
Special tools
Puller multi-function Vittorazi: flywheel, clutch, propeller hub, wrench drum-pinion.
Studs clamp of 7 and 8mms
Piston block plug
Puller bearings for closed housing: shaft 10mms and 15mms
Cut strip and crimp tool
Oil can
Riveter
