NVR Manual
- 4 -
Remote port setting:
the default is 5050, if there are several NVRs in the LAN, need to change
this port is for login NVR by IE, CMS. Login NVR by mobile, the port should be +3 based on the
device port.
HTTP port:
the default port is 80, suggest modifying it. This port is for login NVR by IE, input NVR
IP address or domain name; need to add colon and HTTP port number.
Example:
show as the above right picture, access NVR by IE in LAN, first add 2 forwarding rules
in the router, the IP address is 192.168.1.188, the forwarding ports are 5050-5053, 80. Please
input http://192.168.1.188:80 at IE browser and download ActiveX, then close the IE before install
the ActiveX, after installing it successfully, then reopen IE with http://192.168.1.188:80, it will show
login menu, input device port:5050, user name: admin, no password, can access NVR.
If access NVR by IE in WAN, please use static IP or dynamic domain name
,
the operation is same
as LAN.
6. Connect with IP Camera
6.1 Manual Search
Right click to select
【
IP channelSetting
】
Manual, click
Search
button, NVR will search out all IP
cameras in the LAN, it will take 18-30 seconds, after finishing the configuration, click Save to
logout, then the image will come out.
A –Area
is cameras IP address searching area——click
Search
to get the camera IP addresses
in LAN.
B- Area
is camera IP address modification area——double click IP camera in A area, B area will
show camera network data, some cameras can change IP address directly in B area.