95x Series Operating Manual - May 17, 2022
Page
13
of
155
Option
AC-2
changes the AC Voltage capability to 10-2000V and has increased drive capability at all voltage output
levels.
Option
500VA
(not available for the 952i or 954i) extends the AC voltage drive capability to 100mArms.
Option
AC-10
(only available for the 957i) extends the AC voltage drive capability to 10KVrms (same as standard in
a 955i).
INTERNAL GROUND BOND OPTION
This option may be fitted in a 957i and cannot be fitted if Opt. AC-10 is fitted.
Option
GB-40
adds ground bond testing capability to the 957i (same as standard in a 952i, 954i and 959i).
EXTERNAL AC VOLTAGE OPTION
This option may be fitted in a 951i, 952i, 953i, 954i, 955i or 957i.
Option
AC-30
extends the maximum AC Voltage capability to 30KV by means of an external unit.
PULSE TESTING OPTION
This option may be fitted in a 951i, 952i, 953i or 954i (not available with Option 500VA) or a 957i (not available
with Opt. AC-10).
Option
PMT-1
adds pulsed voltage testing.
DUT ISOLATION OPTION
One of these options may be fitted in a 951i, 952i or 956i.
Option
HSS
adds the ability to measure AC or DC breakdown and/or leakage into a grounded DUT with down to
10nA resolution.
Option
HSS-2
adds the ability to measure DC breakdown and/or leakage into a grounded DUT with down to 1nA
resolution.
TERMINAL OPTION
One or none of these options may be fitted in any 95x.
Option
RPO-95
adds rear panel terminals in parallel with the front panel terminals.
Option
RPOO-95
replaces the front panel terminals with rear panel terminals.
POWER INPUT OPTION
Any of these options may be fitted in any 95x.
Option
LOLINE
changes the standard 105-245Vrms line voltage range to 80-125Vrms.
Option
INRUSH
reduces the power-on inrush current at 230V line from over 100Apk to nominally 40Apk but limits
the line voltage range to 200-245Vrms.
RACK MOUNTING OPTION
This option may be fitted in any 95x.
Option
RM-1
allows for standard 19” rack mounting of the 95x.
OUTPUT VOLTAGE/CURRENT LIMITING OPTIONS
The user may, at the time of order, specify that the DC and/or AC Voltage generated by the 95x may be limited to a
user specified voltage less than that normally available from the specific unit model (but must be greater than
