manualshive.com logo in svg

Vitoquen SEDVR-6032, User Manual, Page: 52 / 82

Share
Download
Vitoquen SEDVR-6032 User Manual Download Page 52

 

7. For control during playing video, please refer to ‘

Playback Control

’. 

 

Note 

Max. 5000 files will be displayed by search; the records over 5000 will not be 
displayed. User may change search criteria to get expected record files. 
During playback, when current segment is over, system will continue 
playback by jumping to the next segment. 

 

Section 3   RECORDER (Record Setup) 

 

Users can select “

Recorder Setup

” through the menu as shown in the following Figure: 

 

Figure 29 RECORDER SETUP 

 

 

 

SCHEDULE (Schedule Record) 

To provide the automatic recording function according to the video time set by user. 

Timer Record function can set the video quality, video frame rate, video stream and video 

time of each channel separately with the following operational steps: 

1. User selects ‘

SCHEDULE

’ through the menu. 

2. Press ‘

Enter

’ and enter into 

Timer Record

 parameters setup menu, then user can select 

Summary of Contents for SEDVR-6032



















































































Reviews:

No comments