8
EN
5) Ensure the gas cartridge to be
replaced is completely empty before
inserting a new one. Never change a
cartridge unless the appliance is shut off.
6) Check the seals before
connecting a new cartridge to the
appliance.
7) Screw off the bottom of the
cartridge holder and take out the
empty cartridge.
8) Insert the gas cartridge and
screw on the bottom of the
cartridge holder.
B. LIGHTING
OF THE BLOW TORCH
1) Ensure that there is no gas
leakage.
2) Approach an ignition source near
the burner, open slowly the gas tap
until the gas ignites.
3) To regulate the intensity of the
flame, slightly open or close the
knob of the gas tap.
4) The phenomenon of flaring which
may be occurred during warming up
period or if the appliance is moved.
C.SHUTDOWN OF THE
BLOWTORCH
To shutdown the blowtorch, the
control knob of the gas tap must
be fully closed. After using this
appliance, wait until the blowtorch
cools down completely.
D. ADJUST THE RATE
Open
Closed
CAUTION: accessible parts may
become very hot.
Keep young children away from the
appliance.
E. SERVICE
In case assistance or maintenance
is needed please contact your
dealer.
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
Meets the following standards
or standardization documents:
EN 521:2006
EN 1326: 1996
WARRANTY
TERMS
The warranty of this machine is two
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material or
operating, as well as parts and work
needed for their recovery.Excluded
from the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO) as
well as any damage caused by the
use of it.