Vito Agro VIBSS1100, Instruction Manual

Page: 22 / 40

While operating power tools, you should consider
basic safety precautions to avoid the risk of fire,
electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
in order to ensure your own safety. Always use the
submersible water pump carefully and responsibly.
In using the device, you accept full responsibility for any
accidents caused to third parties or their goods during its
use. Before operating the submersible water pump for the
first time, users should be instructed by the seller or any
other qualified person on how to use it.
The instruction manual is considered an integral part of the
submersible water pump and must always be made
available alongside the product.
Familiarize yourself with the control devices and use of the
submersible water pump. In particular, the user must know
how to quickly stop it.
Do not run the submersible pump if you are not both
physically and mentally well. Do not run the water pump if
you are not both physically and mentally well. If you have a
health problem, ask your doctor if it is safe for you to use
the submersible water pump before doing so.
Never allow the submersible water pump to be used by
children, individuals with limited physical, sensory or
mental abilities, individuals with lack of experience and
knowledge of the appliance, or others unfamiliar with the
use instructions.
Do not operate the pump in aquariums or tanks
where there are fish.
The submersible water pump may only be used as
stated in this instruction manual. Any other use,
which may be dangerous and may cause injury to the user
or damage to the submersible water pump, is not
permitted.
For safety reasons, any alteration to the submersible water
pump other than installing accessories specifically
authorized by the manufacturer, is prohibited. The warranty
on your water pump will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
The power cord must be plugged into a 230V 50Hz
socket with differential protection.
The circuit breaker must be set to trip when there is a
maximum fault current of 30mA and to allow nominal
currents above 6A.
According to the VDE 0100 standard, the use of
pumps in swimming pools, ponds and garden
fountains is only permitted with the use of circuit breakers
integrated in the power supply circuit that supply the
pump. If there are people in the pool or in the garden pond,
it is not allowed to use the submersible water pump.
Protect sockets from moisture. If there is a risk of flooding,
install the sockets in a location that cannot be affected by
flooding or install properly protected sockets.
Protect the power cord, plug and socket from coming into
contact with heat, oil and sharp objects. If the power cord
is damaged, it must be replaced by a qualified technician.
It must not be repaired.
Ensure the submersible water pump is only used by
individuals who have familiarized themselves with the
instruction manual.
Before running the water pump, replace any faulty, worn
out or damaged parts.
To ensure that you are working safely with the submersible
water pump, before starting it up, you should check that:
▪
The whole submersible pump is assembled correctly;
▪
The safety devices are in perfect condition and function
properly. Never run the submersible water pump if the
safety devices are missing, inhibited, damaged or worn
out;