BLADE USEAGE
1. Carefully install the blades (C, D and E) inside the lid correctly by rotating clockwise.
2. Both ends of food should be cut flat to allow the food holder to rotate the food.
3. Place food in the center of the blade.
4. Put the food holder into the unit.
5. Slide unit into food chute by aligning the ridge.
6. The unit has start/stop button, keep press the button for continuous working.
7.
When change blades remove carefully by rotating anti-clockwise.
CLEANING AND CARE
Handle the blades with care as they are extremely sharp.
Before cleaning, please allow the appliance to cool down completely and ensure it has been unplugged.
The bowl can be rinsed under water but must not be placed in the dishwasher.
Clean the surface of the motor unit with a damp cloth; never immerse in water, and ensure all parts are
fully dried.
Do not use any abrasive detergents or alcohol-based cleaning products.
If the plastic parts become stained by foods such as carrots, rub the affected areas with a cloth soaked
in vegetable oil and then clean as normal.
Once fully dry, keep all accessories together for ease of use next time, and store the appliance in clean,
dry place away from extreme temperatures and moisture.
TROUBLESHOOTING
Questions
Answers
The product is not working
•
Make sure voltage is compatible
•
Make sure it is fully plugged in
•
Make sure the power cord and socket is in
good condition
•
Make sure you hold the button down
throughout use
Food splits into circles
•
Make sure both ends of food are cut flat
•
Make sure food is installed on the inside pillar
of the blade
•
Make sure the food is held by the food chute
•
Make sure the food chute is aligned with the
ridge
