Step Six:
Make sure the food is installed on the inside pillar of the blade then plug unit in.
Hold the unit with one hand and rest the other hand on the lid.
Push while slowly pressing down with unit until most of food is processed.
Approximately 1 cm of food will remain unprocessed.
WARNING: IF THE BLADES ARE NOT INSTALLED IN THE CORRECT POSITION,
THE UNIT WILL NOT WORK. PLEASE INSTALL THE BLADES INSIDE THE BOWL IN
THE CORRECT POSITION TO MAKE SURE THE UNIT IS WORKING PROPERLY.
Step Four:
Place a single piece of food in food chute. For best results, cut food no longer than
food chute’s height and no more than 7cm wide. Both ends of food should be cut flat to allow
food holder to rotate with ease. Place food in the center of the blade, press until it holds in
place.
Step Five:
Place the food holder (B) into the unit. Place unit into food chute by aligning with
ridge.
