4
N
E
L
Single live supply
Dual live supply
N
E
L1
L2
N
E
L
Single live supply
Dual live supply
L2
Wire link
Wire link
N
E
L1
•
Diagrams show separate switches for each channel. One switch can be used for both channels. For 2 switches set
switch mode on detector to
“
1 position switch separate
”
otherwise it can be left as default for 1 switch operation set
to
“
1 position switch together
.”
•
In 2 switches mode as shown, short push turns ON, Long held push turns OFF (>1 sec)
(Allow a few minutes initial power
-
on setup to take place before operation the switches!)
•
See detector programming manual further information.
Presence detector connections
-
Automatic on, automatic off
Absence detector connections
-
Manual on, automatic off
Switch Noise Filtering
Due to the noise filtering process, there is a small delay of ~0.3 seconds. Therefore, kindly apply an assured push action
to these momentary switches, as fast clicks on the switches will be ignored as they are treated as noise on the line.
Ch1
Ch2
Ch1
Ch2
