background image

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM

Version 2.0

July 2017

LIMITED PRODUCT WARRANTY

VITEK products carry a three (3) year limited warranty. VITEK 

warrants to the purchaser that products manufactured by VITEK 

are free of any rightful claim of infringement or the like, and when 

used in the manner intended, will be free of defects in materials and 

workmanship for a period of three (3) years, or as otherwise stated 

above, from the date of purchase by the end user. This warranty is 

nontransferable and extends only to the original buyer or end user 

customer of a VITEK Authorized Reseller.

The product must have been used only for its intended purpose, and 

not been subjected to damage by misuse, willful or accidental damage, 

caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the 

guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become 

necessary.

VITEK makes no warranty or guarantee whatsoever with respect to 

products sold or purchased through unauthorized sales channels. 

Warranty support is available only if product is purchased through a 

VITEK Authorized Reseller.

Summary of Contents for VTC-TNB4RFS





















































Reviews: