Transcendent IP Cameras v4: Operation Manual
29
your requirements.
Use PPPoE-
Click “PPPoE Config” tab to go to the interface as shown below. Enable PPPoE and then
enter the user name and password from your ISP.
You can choose either way for the network connection. If you use PPPoE to connect internet, you will
get a dynamic WAN IP address. This IP address will change frequently. You may use the function of
IP change notification.
Click “IP Change Notification Config” to go to the interface as shown below.
Trigger Email
: when the IP address of the device is changed, a new IP address will be sent to the
appointed mailbox automatically
Trigger FTP
: when the IP address of the device is changed, a new IP address will be sent to FTP
server.
1.6.2
Port
Go to Config
à
Network
à
Port interface as shown below. HTTP port, Data port and RTSP port can be
set.
HTTP Port
: The default HTTP port is 80. It should be changed to any port which is not occupied.
Data Port
: The default data port is 9008. Please change it as required.
RTSP Port
: The default port is 554. Please change it as required.
