Transcendent IP Cameras v4: Operation Manual
32
2. Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2, Enable SNMPv3)
according to the version of the SNMP software you download.
3. Set the “Read SNMP Community”, “Write SNMP Community”, “Trap Address”, “Trap Port” and
so on. Please make sure the settings are the same as that of your SNMP software.
Note
: Please use the different version in accordance with the security level you required. The higher
the version is, the higher the level of the security is.
1.6.6
RTSP
Go to Config
à
Network
à
RTSP.
