Vitek VTC-BRE24F, Manual

Page: 11 / 19

VTC-BRE24F / VTC-IRE24F
9
2-2. NIGHT
NIGHT DEFAULT DESCRIPTION
BURST OFF
* Select BURST ON or OFF
SMART IR OFF
* Set LED POWER, ANTI-SAT & SAT AREA.
Can set SAT AREA when use ANTI-SAT.
Note: If set D&N at Night, White Balance is not activated.
2-3. EXT
EXT DEFAULT DESCRIPTION
EXTERN
S/W
* Must keep HIGH (IR LED Cameras only).
If use LOW, picture changes to B/W.
D / N
DELAY
3SEC
* Dwell time before switch D <--> N after check
light level.
* DELAY can avoid unnecessary switching by
short term light.
* To make right switch D <--> N, camera should
retain the present environment for longer than
DELAY(DWELL TIME).
B / W
BURST
OFF
* Select BURST ON or OFF
SMART IR
* Set LED POWER, ANTI-SAT & SAT AREA.
Can set SAT AREA when use ANTI-SAT.
3. WHITE BAL
WHITE BAL DEFAULT DESCRIPTION
WHITE BAL ATW
* ATW(Auto Tracking White Balance)
* MANUAL: Adjust White Balance with fixed values
of BLUE and RED. User can adjust the color and
temperature by controlling RED and BLUE gain
Recommend to use when the light temperature is
fixed all the time.
* PUSH: Use when White Balance is deviated.
Press Enter(Set) button. White Balance is
performed whenever the enter(set) button is
pressed