background image

Panel Type
Display Colors
Pixel Pitch
Recommended Resolution
Contrast Ratio
Brightness
Viewing Angle
Response Time
Scanning Frequency
Video Inputs/Outputs
S-Video Input
PC Inputs
HDMI Inputs
Audio Inputs
Screen Control
LCD Lamp
VESA Mountable
Rack Mount Available
Weight
Power Supply
Dimensions (w/o Stand)

 

VTM-LCD154P VTM-LCD174P VTM-LCD194P

15” TFT Color LCD

16.2 Million Colors

0.297 mm

XGA (1024x768)

700:1

260 cd/m2

H: 80 degrees V: 80 degrees

<8ms

H: 31~65kHz V: 56~75Hz

Looping BNC Composite

YES

15 pin D-Sub (Analog RGB)

N/A

Stereo RCA In / 3.5mm In/Out

OSD (On Screen Display Menu)

30,000 hours

YES
N/A

5.3lbs. (2.4kg)

AC 100~240V 50/60Hz

13.4” x 11.2” x 1.97” (340 x 284 x 50mm)

17” TFT Color LCD

16.2 Million Colors

0.264 mm

SXGA (1280 x 1024)

800:1

300 cd/m2

H: 160 degrees V: 135 degrees

<5ms

H: 31~65kHz V: 56~75Hz

Dual Looping BNC Composite

N/A

15 pin D-Sub (Analog RGB)

YES

Stereo RCA In / 3.5mm

OSD (On Screen Display Menu)

50,000 hours

YES

YES - Model VT-LCD174SRM

7.7lbs. (3.49kg)

AC 100~240V 50/60Hz

14.57” x 12.7” x 1.97” (370 x 322 x 50mm)

19” TFT Color LCD

16.2 Million Colors

0.294 mm

SXGA (1280 x 1024)

800:1

300 cd/m2

H: 160 degrees V: 135 degrees

<5ms

H: 31~65kHz V: 56~75Hz

Dual Looping BNC Composite

N/A

15 pin D-Sub (Analog RGB)

YES

Stereo RCA In / 3.5mm

OSD (On Screen Display Menu)

50,000 hours

YES

YES - Model VT-LCD194SRM

9.9lbs. (4.49kg)

AC 100~240V 50/60Hz

16.5” x 14.2” x 2.2” (419 x 360 x 56mm)

PROFESSIONAL LCD SERIES

FuLL FEAtuRED SECuRIty MONItORS.

VTM-LCD Series

15”, 17” & 19” Professional LCD Monitors

Vitek Professional Grade LCD Monitors are designed for constant use 
in a surveillance application. They combine sharp brilliant colors along 
with easy to use OSD functions and built in speakers, 3.5mm PC Audio 
and stereo RCA In/Out connections are provided for versatility and 
convenience. The VTM-LCD174P and 194P also feature Dual Composite 
Looping BNC Video and HDMI input along with 800:1 Contrast Ratio 
delivering Industry Leading Performance and Picture Reproduction. An 
Easily removable stand and VESA Mounting Capability allow for use 
in Wall Mounting Applications and optional Swivel Rack Mounts are 
available: Model VI-LCD174SRM/VI-LCD194SRM.   

FEATURES:

 

15”, 17“, and 19” Professional LCD Display Panels

 

Designed for continuous 24/7 operation

 

VGA, Looping BNC Composite, and S-Video Video 

Inputs.  HDMI Inputs on 17“ & 19” Versions

 

Resolution up to 1280 X 1024 (17” & 19”)

 

Rated for up to a 50,000 Hour Panel Life (17” & 

19”)

 

Stereo Audio Input/Output

 

Multi-Language OSD (On Screen Display) with 

Front Panel Controls

 

VESA Standard Mounting

 

Optional Swivel Rack Mounts (17” & 19”)

VTM-LCD154P Rear Inputs

VTM-LCD174P & VTM-LCD194P Rear Inputs

Summary of Contents for VTC-2810

























Reviews: