background image

Video Input
IPS (Display / Recording)
Video Output
BNC Output
Audio In/Out
Storage
Archive
USB Port
System Control
Network
RJ-45 Ethernet Port
Playback Rate

PTZ
Point of Sale (POS)
Motion Area Setting
Recording Resolution Setting
Recording Quality Control
E-mail notification
System Configuration
Bandwidth limit
Two-Way Audio
Case Form Factor

VGA - 1 SXGA (1280 X1024)

Monitor: 1 Composite(BNC) / Spot: 1 Composite(BNC)

4 Line In (RCA) / 1 Line Out (RCA), CODEC : G.711 (64Kbps)

Up to 1 Internal HDD (SATA)

USB Device & Network

1 Front +1 Rear

Front Panel, USB Mouse, Included IR Remote Control

TCP/IP, HTTP, DHCP (DDNS)

10M/100M

1 - RS-485 - Supports most of PTZ protocols with up to 255 Presets

N/A

Adjustable GRID(16X16), 10 Steps Sensitivity Level

By each camera for different resolution setting(CIF/2CIF/D1)

4 Levels (Low/Standard/High/Highest)

E-mails to specific users to notify events

Full setup configuration over network

YES: Adjustable by User

YES

1.3U

4 Channels

120 / 120 (HD1)

120 fps @ 704x240

60 fps @ 704x480

8 Channels

240 / 240 (CIF)

240 fps @ 352x240
120 fps @ 704x240

60 fps @ 704x480

 

VT-EHL4   VT-EHL8

VT-EHL

4 & 8 Channel H.264 

Digital Video Recorders

Simplicity and reliability is the basis upon 
which the EH L Digital Video Recorder 
was conceived. With almost every 
powerful feature of its predecessor the 
“EH”, the EHL offers an economical 
option for providing the most advanced 
recording solution available. As part of 
the EH family, the EHL is completely 
compatible with all VITEK EH Platform 
application software. 

FEATURES:

 

4 or 8 Video Inputs with 1 Main, 1 Spot Monitor Output and 1 VGA output. 

 

Real Time Recording with Up to 120 IPS at HD1 Recording / Live Display (VT-EHL4) 

/ 240 IPS at CIF (VT-EHL8)

 

H.264 Compression

 

Supports Static & Dynamic IP Addresses

 

4 Alarm & Audio Inputs / 1 Output

 

500GB to 2TB Internal Storage Options

 

Remote Viewing over the Internet, LAN, Explorer, Safari, Firefox, Opera and Chrome

 

Applications for iPhone, iPad, iTouch and Droid Devices

 

“Quick Search” Function for automatic review 

 

Mac OSX Client & CMS Central Management Software Included

 

Automatic sending of Health & Event notifications via email 

 

Control locally via Front Panel, USB Mouse or with the Included IR Remote control

 

PTZ Control over RS-485

Remote Viewing from anywhere using 

Internet Explorer

Remote Viewing Apps for iPhone, iPad 

& Android   

Included VT-EH CMS Software allows 

remote viewing and control of multiple 

VT-EH Series DVR’s even when 

located at multiple locations!

VT-EHL4 Rear Connections

VT-EHL8 Rear Connections

Summary of Contents for VTC-2810

























Reviews: